BUBBLE LEVEL
FREE WITH
ALL MOUNTS




Payment Processing

  Home > >

Cheetah Mounts APTMMB TV Wall Mount Bracket for 20-90� TVs up to VESA 730 and 165lbs, Fits 16� And 24� Wall Studs and includes a 10� Twisted Veins HDMI Cable and a 6� 3-Axis Magnetic Bubble Level

 
Alternative Views:
Our Price: $34.95

Product Code: APTMMB
Qty:

  
Description Extended Information
 

FITS 20-90" TVs up to VESA 730 and 165lbs
This mount fits virtually all 20-90" TVs sold today. It will fit smaller TVs with single stud mounting and TVs up to 80� or more as long as the VESA hole pattern is less than VESA 730x400 (29x16�) and 165lbs.

CAN BE MOUNTED TO EITHER 16� OR 24� WOODEN STUDS
In the VESA 730 configuration, this mount supports mounting into two 16� or even 24� wooden wall studs used in some homes as well as all types of masonry. All mounting hardware is included.

LOW 1.9" PROFILE
The APTMMB profile is only 1.9" yet still offers up to 15� tilt to improve viewing and reduce glare. Due to the low profile, TV's inputs are difficult to reach once mounted. If input access is an issue, Cheetah offers various arm mounts.

ALLOWS 3� ROTATION ADJUSTMENT TO LEVEL AFTER INSTALLATION
Slots in the wall plate allow for 3� of rotation adjustment to level the display after mounting.

10' TWISTED VEINS HDMI CABLE AND 6� MAGNETIC BUBBLE LEVEL
The mount includes a 10� Twisted Veins High Speed with Ethernet HDMI cable featuring 4K 60HZ 3D signal support and a protective braided jacket. A 6" 3-axis Magnetic Bubble Level ensures level mounting.

INCLUDES ALL NECESSARY MOUNTING HARDWARE
This mount ships with hardware for both wall and TV mounting.

LIFETIME 100% GUARANTEE
All our mounts come with a lifetime guarantee. If you experience ANY issues, please contact us.
Features


  • Fits 20-90" TVs with Hole Patterns up to VESA 730x400mm (29x16�) and up to 165lbs
  • Mounts to Either 16� or 24" Wooden Studs as well as all Masonry
  • 1.9� Profile and 15�of Forward Tilt
  • Allows for 3 degrees of Rotation Adjustment to Level after Installation
  • Includes a Twisted Veins 10' HDMI cable and a 6" 3-axis Magnetic Bubble Level
Average Customer Review: 1 of 5 Total Reviews: 3 Write a review.


  0 of 0 people found the following review helpful:
 
Doesn't work with 16" studs if stud is on center January 25, 2013
Reviewer: James Lloyd from San Francisco, CA United States  
I want this mount to go on a section of a wall between two windows that is just a bit wider than the TV. There are three studs at 16" spacing, with the middle stud exactly half way between the two windows. This means I need to use the two outer studs space 32" apart, but the maximum spacing is only 27".

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Does NOT fit all October 18, 2012
Reviewer: Jim from grandville, MI United States  
I have a 47" LG LCD TV and this mount will not work for that TV, The mounting holes are 32" apart and this mount only goes to 27".

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
Cheap August 3, 2011
Reviewer: Anonymous Person from Minneapolis, MN United States  
I had to install a 46" Samsung for an electronic billboard in a lobby. The 8mm screws were such poor quality, one wobbled while turning in and two of them stripped before getting tight. Had to make a trip back to the shop for some 8mm 8.8 hex cap screws. I would spend more if it were going in my home.

Was this review helpful to you?


Browse for more products in the same category as this item:


Multi shelves > MOUNT TYPE > Tilt / flat mount


Multi shelves > MOUNT TYPE

MOUNT TYPE > Flat/Tilt Mount
Multi shelves
MOUNT TYPE